Digital Watchdog Starlight D1363D Technical Information PDF herunterladen (Seite 12)

Changing Network information

Select interfaces -> ether1 -> ip assignments to change the IP address. The box will allow you to

create, remove, edit, or disable/enable an IP address. You can tab between fields if not using a mouse,

or use the <Alt>+hotkey combination to select the appropriate field. (see fig 4)

fig 4: Interfaces menu

While here, look at the bottom of the box labeled “Ethernet Bridge Number (1-9, 0=disabled)”. By

default, the StarOS system, unlike most wireless systems, is a router, not a bridge. If you want this

system to act like most most APs, CPEs, or wireless bridges on the market, you'll want to change this

box from 0 to 1. (see fig 5) For an explanation of routers versus bridges, see “A note about bridging”

later in this chapter. When you're finished, hit the <ESC> key to get out.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 101 102

Keine Kommentare

Digital Watchdog Starlight D1363D Technical Information Seite 12