Digital Watchdog Starlight D1363D Technical Information PDF herunterladen (Seite 54)

If you disable a route, the route will have a '*' following the line number, as in fig 2 below.

fig 2: Static routes configuration box

Dynamic Routing

Selecting dynamic routing (rip, ospf & mesh) provides you with an option to use one of the dynamic

routing methods available in StarOS. The three selections you have are as follows:

➢ RIPv1/2: activates and provides configuration access to only RIP

➢ OSPFv2: activates and provides configuration access to OSPF, BGP, and RIP

➢ OLSR: activates and provides configuration access to mesh routing

Selecting any one will activate that service (see fig 3). The static routes in fig 2 above are a prime

candidate for dynamic routing via OSPF.

Enabling OSPF in one radio is like only having one radio, though. With no neighbor(s) to talk to, the

OSPF daemon has no peers to share routing information with. So the same service must be started on

those systems connected to this one.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 101 102

Keine Kommentare

Digital Watchdog Starlight D1363D Technical Information Seite 54